Iron furniture is popular for its dense classical style. However, due to the change of climate and temperature and improper use of skills, it is easy to rust on the surface of furniture. How to clean iron furniture?

　　1. Soft bristles brush off dust

　　To remove the dust on the surface of iron, you should use a cotton cloth dipped in a mild detergent and gently wipe it. For the dust in the depression, you can use a fine soft wool brush (you can also trim part of the length of the idle sheep hair) to brush it along the gap.

　　2. Oil and wipe to avoid rust

　　In order to avoid rusting of chrome plated layer of iron furniture, you can use gauze dipped in a small amount of anti rust oil and sewing machine oil to wipe the chrome plated part. You can always apply oil to make the iron furniture bright as new. Once rust appears on the chrome plated layer of iron furniture, it should be removed as soon as possible to avoid the expansion of rust area.

　　3. Avoid contact with soap water

　　Soap is an alkaline substance. Sulfuric acid, vinegar, methylalkali, soap water, soda water and other acid-base substances will corrode iron. If it is accidentally stained, dilute the liquid and wipe it with dry cotton cloth, and then take corresponding treatment measures.

　　Furniture maintenance

　　1. Wood furniture waxing can't stop

　　Often use polish oil, sand wax for furniture polish wax, you can adhere to furniture long time light.

　　2. The cloth cushion is often turned over

　　All kinds of cloth cushions are turned over once a week to make them wear evenly. A space of 0.5 to 1 cm is reserved near the wall to prevent them from touching the wall.

　　3. Pay attention to temperature and humidity

　　Leather furniture should be placed with ventilation to avoid direct sunlight or air-conditioning outlets facing each other, so as to avoid skin surface hardening and fading due to overheating or supercooling.

　　4. Iron art should be stable on the ground

　　Uneven floor will constitute a slight deformation of furniture, therefore, the floor of iron furniture should be as flat as possible to avoid affecting the service life of furniture.

      The article comes from:http://www.weidiwj.com